Tire change on ATV’s the same idea as changing a tire on a bicycle rim if the weld bead is harder to break and sitting on the ATV tires. However, if you take the time to do it right, done changing an ATV tire very quickly and professionally in the garage or the dirt. As long as keep safety in mind, the order does not cause damage to the ATV or you will. It is recommended to opt for the super swamper ATV tires
Secure the ATV
Begins before removing the rim and tire, you must safely secure ATV. Jack the ATV and soothe the axle or the frame on jack stands or something else sturdy that will not tear. You can use the tabs on the rim freely before breaking lift the bike, but never take the wheel while he was still sitting on the floor. Some models are equipped with expensive disc brakes can be damaged if the weight of the ATV is ultimately placed on it.
Protect the Rim
Most modern ATV rims are made of aluminum, which is more easily damaged, as a steel wheel would be done. Therefore, use only wooden or rubber-coated tools to break free the tire bead from the rim. The probability is harming you to reduce the surface of the aluminum. If you then run do not have access to such a thing, with a crowbar and thick rag and slowly around the outer edge of the rim, break free a little of the bead at a time. It is a good idea, wood or rubber-coated tools to use, even if the rim is made of steel to reduce the risk of damage.
Lubricating and installing
The bead of the tire ATV tricky on the back the lip of the rim, so it’s a good idea to add it to lubricate before mounting. You can free engine oil or a lubricant such as WD-40 and size coat the inner bead of the tire and the outer edge of the rim so that the tire slips on easily. Detergent used if you in the garage. If the tires fighting and having to force them only to use blunt tools like wooden blocks or the handle of a screwdriver, the tire to coax. If other tools such as a hammer or a screwdriver blade to be used, making the risk of puncturing the tires unusable run.
How the size of ATV tires
If your all-terrain vehicle (ATV) tire has suffered a puncture or blow-out, or when the tire to the point that it will no longer be carried safely, you need to remove and replace. Knowing how to read the size of your current ATV tires help you to determine what size of spare tire you need. Just as automobile and motorcycle tire numbers and symbols have marked on its side walls, so the tires that fit on your three-, four-, six- or eight-Wheeler. The numbers, letters, and symbols provide information that is for buying the right replacement tires.
• Look at the figures on your ATV tires as 25x10x12 or 25×10-12 canceled. This series will be your tire size.
• Determine the first number. In this case, the example given above is the number “25”. This number is the height of the tire: 25 inch.
• Determine the second number. In the given example, it is “10”. This is the width of the ATV tires: 10 inches.
• Read the latest issue on the tire which is in the example “12.” This number is the rim diameter. Tires with a “12” as the latest issue are designed to be mounted on an ATV with 12-inch wheels.
Tips and Warnings
- When appointing an ATV tires, make sure that you make your request with the three numbers in the correct order.
- Make sure your tires properly when inflated your ATV. If not, you can damage the rims or tires or injure themselves or others.
- If your ATV with a larger size tire than what would equip recommended by your owner’s manual, contact a tire sales professional to find out your options. Incorrect tire fitting can handle problems with the ATV, which can result in injury or death to the operator or passenger.